ECS4100 Series CLI Reference Guide-R07

Chapter 27 | Multicast Filtering Commands
IGMP Filtering and Throttling
– 689 –
ip igmp igmp-with-
pppoe
This command globally enables the support of IGMP with PPPoE protocol. Use the
no form to disable the feature.
Syntax
[no] ip igmp igmp-with-pppoe
Default Setting
Disabled
Command Mode
Global Configuration
Example
Console(config)#ip igmp igmp-with-pppoe
Console(config)#
ip igmp profile This command creates an IGMP filter profile number and enters IGMP profile
configuration mode. Use the no form to delete a profile number.
Syntax
[no] ip igmp profile profile-number
profile-number - An IGMP filter profile number. (Range: 1-4294967295)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
A profile defines the multicast groups that a subscriber is permitted or denied to
join. The same profile can be applied to many interfaces, but only one profile can
be assigned to one interface. Each profile has only one access mode; either permit
or deny.
Example
Console(config)#ip igmp profile 19
Console(config-igmp-profile)#