ECS4100 Series CLI Reference Guide-R07

Chapter 19 | Address Table Commands
– 510 –
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table hash-algorithm
Configured Hash Algorithm: 0
Activated Hash Algorithm: 1
Console#
show mac-address-
table count
This command shows the number of MAC addresses used and the number of
available MAC addresses for the overall system or for an interface.
Syntax
show mac-address-table count [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/26/28/52)
port-channel channel-id (Range: 1-16)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show mac-address-table count interface ethernet 1/1
MAC Entries for Eth 1/1
Total Address Count :0
Static Address Count :0
Dynamic Address Count :0
Console#show mac-address-table count
Compute the number of MAC Address...
Maximum number of MAC Address which can be created in the system:
Total Number of MAC Address : 16384
Number of Static MAC Address : 1024
Current number of entries which have been created in the system:
Total Number of MAC Address : 3
Number of Static MAC Address : 1