ECS4100 Series CLI Reference Guide-R07

Chapter 4 | System Management Commands
File Management
– 141 –
upgrade opcode
reload
This command reloads the switch automatically after the opcode upgrade is
completed. Use the no form to disable this feature.
Syntax
[no] upgrade opcode reload
Default Setting
Disabled
Command Mode
Global Configuration
Example
This shows how to specify a TFTP server where new code is stored.
Console(config)#upgrade opcode reload
Console(config)#
show upgrade This command shows the opcode upgrade configuration settings.
Command Mode
Privileged Exec
Example
Console#show upgrade
Auto Image Upgrade Global Settings:
Status : Disabled
Reload Status : Disabled
Path :
File Name : ECS4100-series.bix
Console#
TFTP Configuration Commands
ip tftp retry This command specifies the number of times the switch can retry transmitting a
request to a TFTP server after waiting for the configured timeout period and
receiving no response. Use the no form to restore the default setting.
Syntax
ip tftp retry retries
no ip tftp retry
retries - The number of times the switch can resend a request to a TFTP
server before it aborts the connection. (Range: 1-16)