ECS4100 Series Web Management Guide-R07

Chapter 13 | Basic Administration Protocols
Simple Network Management Protocol
– 439 –
4. Enter a name and assign it to a group. If the security model is set to SNMPv3
and the security level is authNoPriv or authPriv, then an authentication
protocol and password must be specified. If the security level is authPriv, a
privacy password must also be specified.
5. Click Apply
Figure 273: Configuring Local SNMPv3 Users
To show local SNMPv3 users:
1. Click Administration, SNMP.
2. Select Configure User from the Step list.
3. Select Show SNMPv3 Local User from the Action list.
Figure 274: Showing Local SNMPv3 Users
To change a local SNMPv3 local user group:
1. Click Administration, SNMP.