ECS4100 Series CLI Reference Guide-R07

Chapter 4 | System Management Commands
Time
– 173 –
Reference Time : e0c697a3.6b04c19f Wed, Jul 3 2019 2:55:31.418
Console#
show ntp statistics
peer
This command displays the statistics from an NTP peer.
Syntax
show ntp statistics peer {ip-address | ipv6-address | hostname}
ip-address - IP address of an NTP peer.
ipv6-address - IPv6 address of an NTP peer.
hostname - Host name of an NTP peer.
Command Mode
Privileged Exec
Example
Console#show ntp statistics Peer 192.168.125.88
Remote Host : 192.168.125.88
Local Interface : 192.168.125.138
Time Last Received : 223 seconds
Time Until Next Send : 772 seconds
Reachability Change : 229 seconds
Packets Sent : 8
Packets Received : 8
Bad Authentication : 0
Bogus Origin : 0
Duplicate : 0
Bad Dispersion : 0
Bad Reference Time : 0
Candidate Order : 6
Console#
show ntp peer-status This command displays the status of connections to NTP peers.
Syntax
show ntp peer-status [ip-address | ipv6-address | hostname]
ip-address - IP address of an NTP time server.
ipv6-address - IPv6 address of an NTP time server.
hostname - Host name of an NTP time server.
Command Mode
Privileged Exec
Example
Console#show ntp peer-status
* : system peer