ECS4100 Series Web Management Guide-R07

Table Of Contents
Chapter 3
| Basic Management Tasks
Using Cloud Management
– 107 –
Using Cloud Management
Use the System > Cloud Manage page to enable the cloud management agent on
the switch.
The Edgecore ecCLOUD Controller is a cloud-based network service available from
anywhere through a web-browser interface. The switch can be managed by the
ecCLOUD controller once you have set up an account and registered the device on
the system.
By default, the cloud management agent is disabled on the switch. Setting the
cloud management agent to enabled allows the switch to be managed through the
ecCLOUD system after the next reboot.
Parameters
The following parameters are displayed:
Enable Agent – Enables the switch to be managed through the ecCLOUD
controller.
Registration URL – Displays the configured cloud registration URL. The URL is
read-only in the web interface and can only be configured through the CLI.
Web Interface
To configure the switch for cloud management:
1. Click System, then Cloud Manage.
2. Click the Enable Agent checkbox.
3. Click Apply.
4. Reset the switch to initiate communications with the ecCLOUD controller.
Figure 30: Configuring the Switch for Cloud Management