ECS4100 Series CLI Reference Guide-R07

Chapter 27 | Multicast Filtering Commands
MVR for IPv6
– 760 –
clear mvr6 groups
dynamic
This command clears multicast group information dynamically learned through
MVR6.
Syntax
clear mvr6 groups dynamic domain-id
domain-id - An independent multicast domain. (Range: 1-5)
Command Mode
Privileged Exec
Command Usage
This command only clears entries learned though MVR6. Statically configured
multicast addresses are not cleared.
Example
Console#clear mvr6 groups dynamic
Console#
clear mvr6 statistics This command clears MVR6 statistics.
Syntax
clear mvr6 statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/26/28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id - VLAN identifier (Range: 1-4094)
Command Mode
Privileged Exec
Command Usage
If the interface option is not used then all MVR6 statistics are cleared. Otherwise
using the interface option will only clear MVR6 statistics for the specified interface.
Example
Console#clear mvr6 statistics
Console#