ECS4100 Series CLI Reference Guide-R07

Table Of Contents
Chapter 27
| Multicast Filtering Commands
MLD Snooping
– 711 –
Example
The following shows MLD Snooping configuration information using the global
form of the command first and then the command is executed with keyword vlan
to show specific VLAN MLD configuration.
Console#show ipv6 mld snooping
Service Status : Disabled
Proxy Reporting : Disabled
Querier Status : Disabled
Robustness : 2
Query Interval : 125 sec
Query Max Response Time : 10 sec
Router Port Expiry Time : 300 sec
Unsolicit Report Interval : 400 sec
Immediate Leave : Disabled on all VLAN
Immediate Leave By Host : Disabled on all VLAN
Unknown Flood Behavior : To Router Port
MLD Snooping Version : Version 2
VLAN Group IPv6 Address Port
---- --------------------------------------- ---------
1 ff05:0:1:2:3:4:5:6 Eth 1/1
Console#show ipv6 mld snooping vlan
VLAN 1
Immediate Leave : Disabled
Unknown Flood Behavior : To Router Port
Console#
show ipv6 mld
snooping group
This command shows known multicast groups, member ports, and the means by
which each group was learned.
Syntax
show ipv6 mld snooping group [mld-group | host-ip-addr | sort-by-port |
vlan vlan-id]
mld-group - X:X:X:X::X show only the groups by the specified IPv6
address
host-ip-addr - Displays the ip address of the subscribers of each group.
sort-by-port - Displays groups sorted by port number.
vlan vlan-id - VLAN ID (1-4094), displays the groups of the specified
VLAN.
Command Mode
Privileged Exec
Example
The following shows MLD Snooping group configuration information:
Console#show ipv6 mld snooping group