ECS4100 Series CLI Reference Guide-R07

Chapter 24 | ERPS Commands
– 627 –
inclusion-vlan Use this command to specify VLAN groups that are to be on the inclusion list of an
ERPS instance. Use the no form of the command to removed the VLAN from the list.
Syntax
[no] inclusion-vlan vlan-group-name
vlan-group-name - Name of the VLAN group. (Range: 1-12 characters).
Default Setting
None
Command Mode
ERPS Instance Configuration
Command Usage
◆ VLANs that are on the inclusion list are protected by the ERPS instance.
◆ Any VLAN not listed on either the inclusion or exclusion list will be blocked on
ring ports.
◆ Use the show erps statistics command to view the inclusion-vlan list of VLAN
IDs.
◆ Traffic from control VLANs, inclusion VLANs, and exclusion VLANs of an ERPS
instance will be forwarded by non-ERPS ring ports.
Example
Console(config-erps-inst)#inclusion-vlan vlgroup3
Console(config-erps-inst)#
physical-ring Use this command to associate an ERPS instance with an existing physical ring. Use
the no form of the command to removed the association.
Syntax
physical-ring ring-name
no physical-ring
ring-name - Name of a specific ERPS ring. (Range: 1-12 characters)
Default Setting
None
Command Mode
ERPS Instance Configuration
Command Usage
The physical ring name must first be defined using the erps ring command.