ECS4100 Series CLI Reference Guide-R07

Chapter 13 | Power over Ethernet Commands
– 451 –
power inline
maximum allocation
This command limits the power allocated to specific ports. Use the no form to
restore the default setting.
Syntax
power inline maximum allocation milliwatts
no power inline maximum allocation
milliwatts - The maximum power budget for the port.
(Range: 3000-33600 milliwatts)
Default Setting
33600 milliwatts
Command Mode
Interface Configuration (Ethernet ports 1-8, 24, 48)
Command Usage
◆ The number of ports which can supply maximum power simultaneously to
connected devices is listed in the following table.
◆ If a device is connected to a switch port and the switch detects that it requires
more than the maximum power allocated to the port or to the overall switch,
no power is supplied to the device (i.e., port power remains off).
Example
Console(config)#interface ethernet 1/1
Console(config-if)#power inline maximum allocation 8000
Console(config-if)#
Table 85: Maximum Number of Ports Providing Simultaneous Power
Switch 30W (802.3af) 15.4W (802.3af)
EC4100-12PH 5 8
EC4100-28P 5 12
EC4100-52P 11 24