ECS4100 Series CLI Reference Guide-R07

Chapter 11 | Interface Commands
Interface Configuration
– 416 –
show interfaces
history
This command displays periodic sampling of statistics, including the sampling
interval, number of samples, and counter values.
Syntax
show interfaces history [interface [name [current | previous index count]
[input | output]]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/26/28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id (Range: 1-4094)
name - Name of sample as defined in the history command.
(Range: 1-31 characters)
current - Statistics recorded in current interval.
previous - Statistics recorded in previous intervals.
index - An index into the buckets containing previous samples.
(Range: 1-96)
count - The number of historical samples to display. (Range: 1-96)
input - Ingress traffic.
output - Egress traffic.
Default Setting
Shows the historical settings and status for all interfaces.
Command Mode
Normal Exec, Privileged Exec
Utilization Statistics
Octets input in kbits per
second
Number of octets entering this interface in kbits per second.
Packets input per second Number of packets entering this interface in packets per second.
Input utilization The input utilization rate for this interface.
Octets output in kbits per
second
Number of octets leaving this interface in kbits per second.
Packets output per second Number of packets leaving this interface in packets per second.
Output utilization The output utilization rate for this interface.
Table 76: show interfaces counters - display description (Continued)
Parameter Description