ECS4100 Series CLI Reference Guide-R07

Chapter 32 | DHCP Commands
DHCP Server
– 894 –
Command Mode
Privileged Exec
Usage Guidelines
◆ An address specifies the client’s IP address. If no ip address is specified, the
DHCP server clears all automatic bindings.
◆ Use the no host command to delete a manual binding.
◆ This command is normally used after modifying the address pool, or after
moving DHCP service to another device.
Example.
Console#clear ip dhcp binding
Console
Related Commands
show ip dhcp binding (894)
show ip dhcp binding This command displays address bindings on the DHCP server.
Syntax
show ip dhcp binding [address]
address - Specifies the IP address of the DHCP client for which bindings will
be displayed.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Example
Console#show ip dhcp binding
IP MAC Lease Time Start
(dd/hh/mm/ss)
--------------- ----------------- ------------------ -----------
192.1.3.21 00-00-e8-98-73-21 86400 Dec 25 08:01:57 2002
Console#