ECS4100 Series CLI Reference Guide-R07

Chapter 19 | Address Table Commands
– 508 –
clear mac-address-
table dynamic
This command removes any learned entries from the forwarding database.
Syntax
clear mac-address table dynamic
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Even if a hash collision for a MAC address is resolved, entries in collision MAC
address table are not removed until this command is issued to reset the table, or
the system is reset.
Example
Console#clear mac-address-table dynamic
Console#
show mac-address-
table
This command shows classes of entries in the bridge-forwarding database.
Syntax
show mac-address-table [address mac-address [mask]] [interface interface]
[vlan vlan-id] [sort {address | vlan | interface}]
mac-address - MAC address.
mask - Bits to match in the address.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/26/28/52)
port-channel channel-id (Range: 1-16)
vlan-id - VLAN ID (Range: 1-4094)
sort - Sort by address, vlan or interface.
Default Setting
None
Command Mode
Privileged Exec