ECS4100 Series CLI Reference Guide-R07

Chapter 13 | Power over Ethernet Commands
– 453 –
power inline
time-range
This command binds a time-range to a port during which PoE is supplied to the
attached device. Use the no form to remove this binding.
Syntax
power inline time-range time-range-name
no power inline time-range
time-range-name - Name of the time range. (Range: 1-32 characters)
Default Setting
None
Command Mode
Interface Configuration
Example
Console(config)#interface ethernet 1/1
Console(config-if)#power inline time-range rd
Console(config-if)#
Related Commands
time-range (180)
led-port-mode This command toggles the behavior of all PoE Ethernet port link activity LEDs to
display either traffic activity on the associated port or PoE power transfer on the
port.
Syntax
led-port-mode [link-activity | poe ]
link-activity – If traffic passes through a port, this keyword sets the port’s
link activity LED to blink green. If no traffic is passed, the LED is OFF.
poe – If PoE power is being delivered by a port, this keyword sets the port’s
link activity LED to ON Green. If no PoE connection is present at the port the
LED is OFF.
Default Setting
link-activity
Command Mode
Global Configuration
Command Usage
The command only toggles the activity link LED function on PoE capable Ethernet
ports.