ECS4100 Series CLI Reference Guide-R07

Chapter 9 | General Security Measures
Port-based Traffic Segmentation
– 374 –
Example
This example enables traffic segmentation, and then sets port 10 as the uplink and
ports 5-8 as downlinks.
Console(config)#traffic-segmentation
Console(config)#traffic-segmentation uplink ethernet 1/10
downlink ethernet 1/5-8
Console(config)#
traffic-segmentation
uplink-to-uplink
This command specifies whether or not traffic can be forwarded between uplink
ports assigned to different client sessions. Use the no form to restore the default.
Syntax
traffic-segmentation uplink-to-uplink {blocking | forwarding}
no traffic-segmentation uplink-to-uplink
blocking – Blocks traffic between uplink ports assigned to different
sessions.
forwarding – Forwards traffic between uplink ports assigned to different
sessions.
Default Setting
Blocking
Command Mode
Global Configuration
Example
This example enables forwarding of traffic between uplink ports assigned to
different client sessions.
Console(config)#traffic-segmentation uplink-to-uplink forwarding
Console(config)#
show
traffic-segmentation
This command displays the configured traffic segments.
Command Mode
Privileged Exec
Example
Console#show traffic-segmentation
Traffic segmentation Status : Disabled
Uplink-to-Uplink Mode : Blocking