ECS4100 Series CLI Reference Guide-R07

Chapter 8 | Authentication Commands
AAA
– 251 –
Default Setting
None
Command Mode
Server Group Configuration
Command Usage
◆ When specifying the index for a RADIUS server, that server index must already
be defined by the radius-server host command.
◆ When specifying the index for a TACACS+ server, that server index must already
be defined by the tacacs-server host command.
Example
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
accounting dot1x This command applies an accounting method for 802.1X service requests on an
interface. Use the no form to disable accounting on the interface.
Syntax
accounting dot1x {default | list-name}
no accounting dot1x
default - Specifies the default method list created with the aaa accounting
dot1x command.
list-name - Specifies a method list created with the aaa accounting dot1x
command.
Default Setting
None
Command Mode
Interface Configuration
Example
Console(config)#interface ethernet 1/2
Console(config-if)#accounting dot1x tps
Console(config-if)#