ECS4100 Series CLI Reference Guide-R07

Chapter 5 | SNMP Commands
SNMPv3 Commands
– 205 –
Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.* included
Console(config)#
show snmp engine-id This command shows the SNMP engine ID.
Command Mode
Privileged Exec
Example
This example shows the default engine ID.
Console#show snmp engine-id
Local SNMP EngineID: 8000002a8000000000e8666672
Local SNMP EngineBoots: 1
Remote SNMP Engine ID IP address
80000000030004e2b316c54321 192.168.1.19
Console#
show snmp group Four default groups are provided – SNMPv1 read-only access and read/write access,
and SNMPv2c read-only access and read/write access.
Command Mode
Privileged Exec
Example
Console#show snmp group
Group Name : r&d
Security Model : v3
Security Level : Authentication and privacy
Read View : No readview specified
Write View : No writeview specified
Notify View : No notifyview specified
Storage Type : Nonvolatile
Row Status : Active
Group Name : public
Table 32: show snmp engine-id - display description
Field Description
Local SNMP engineID String identifying the engine ID.
Local SNMP engineBoots The number of times that the engine has (re-)initialized since the snmp
EngineID was last configured.
Remote SNMP engineID String identifying an engine ID on a remote device.
IP address IP address of the device containing the corresponding remote SNMP
engine.