Installation Guide
Table Of Contents
- Compliances and Safety Statements
- About This Guide
- Contents
- Tables
- Figures
- Introduction
- Installing the Switch
- Making Network Connections
- Troubleshooting
- Cables
- Specifications
- Glossary
- Index
C
HAPTER
1
| Introduction
Description of Hardware
– 28 –
Figure 3: System Status LED
1000M On/Blinking Green The port has a valid 1000 Mbps link. Blinking
indicates activity.
Off There is no valid 1000 Mbps link on the port.
Table 2: System Status LEDs
LED Condition Status
PWR (Power) On Green Internal power is operating normally.
Off Power off or failure.
DIAG
(Diagnostic)
On Green System self-diagnostic test successfully completed.
Blinking Green System self-diagnostic test in progress.
Off System self-diagnostic test has failed.
Table 1: Port Status LEDs (Continued)
LED Condition Status
System Status LEDs