Installation Guide

– 25 –
1 INTRODUCTION
OVERVIEW
The ECS3510-28MT switch is a intelligent switch with 24 10/100BASE-T ports,
and four Gigabit combination ports
1
that are comprised of an RJ-45 port and an
SFP transceiver slot. There is also an SNMP-based management agent
embedded on the main board. This agent supports both in-band and out-of-band
access for managing the switch.
This switch provides a broad range of powerful features for Layer 2 switching,
delivering reliability and consistent performance for your network traffic. It
brings order to poorly performing networks by segregating them into separate
broadcast domains with IEEE 802.1Q compliant VLANs, and empower
multimedia applications with multicast switching and CoS services.
Figure 1: Front and Rear Panels
1. RJ-45 ports shared with a SFP tranceiver slots. If an SFP transceiver is plugged in,
the corresponding RJ-45 port is disabled.
10/100 Mbps RJ-45 Ports
Console
Port
System Indicators
Combination
Gigabit Ports
Power Socket
Port Status
Indicators