ECS3510-28T_Management Guide-R05

Table Of Contents
C
HAPTER
17
| Multicast Filtering
Layer 2 IGMP (Snooping and Query for IPv4)
– 623 –
WEB INTERFACE
To show multicast groups learned through IGMP snooping:
1. Click Multicast, IGMP Snooping, Forwarding Entry.
2. Select the VLAN for which to display this information.
Figure 364: Showing Multicast Groups Learned by IGMP Snooping
DISPLAYING
IGMP SNOOPING
STATISTICS
Use the Multicast > IGMP Snooping > Statistics pages to display IGMP
snooping protocol-related statistics for the specified interface.
CLI REFERENCES
"show ip igmp snooping statistics" on page 1212
"clear ip igmp snooping statistics" on page 1209
PARAMETERS
These parameters are displayed:
VLAN – VLAN identifier. (Range: 1-4094)
Port – Port identifier. (Range: 1-28/52)
Trunk – Trunk identifier. (Range: 1-16)
Query Statistics
Querier IP Address – The IP address of the querier on this interface.
Querier Expire Time – The time after which this querier is assumed to
have expired.
General Query Received – The number of general queries received
on this interface.