ECS3510-28T_Management Guide-R05

C HAPTER 14 | Basic Administration Protocols
Simple Network Management Protocol
– 470 –
◆ Unknown community name – The total number of SNMP messages
delivered to the SNMP entity which used a SNMP community name not
known to said entity.
◆ Illegal operation for community name supplied – The total
number of SNMP messages delivered to the SNMP entity which
represented an SNMP operation which was not allowed by the SNMP
community named in the message.
◆ Encoding errors – The total number of ASN.1 or BER errors
encountered by the SNMP entity when decoding received SNMP
messages.
◆ Number of requested variables – The total number of MIB objects
which have been retrieved successfully by the SNMP protocol entity as
the result of receiving valid SNMP Get-Request and Get-Next PDUs.
◆ Number of altered variables – The total number of MIB objects
which have been altered successfully by the SNMP protocol entity as
the result of receiving valid SNMP Set-Request PDUs.
◆ Get-request PDUs – The total number of SNMP Get-Request PDUs
which have been accepted and processed, or generated, by the SNMP
protocol entity.
◆ Get-next PDUs – The total number of SNMP Get-Next PDUs which
have been accepted and processed, or generated, by the SNMP protocol
entity.
◆ Set-request PDUs – The total number of SNMP Set-Request PDUs
which have been accepted and processed, or generated, by the SNMP
protocol entity.
◆ SNMP packets output – The total number of SNMP Messages which
were passed from the SNMP protocol entity to the transport service.
◆ Too big errors – The total number of SNMP PDUs which were
generated by the SNMP protocol entity and for which the value of the
error-status field is “tooBig.”
◆ No such name errors – The total number of SNMP PDUs which were
delivered to, or generated by, the SNMP protocol entity and for which
the value of the error-status field is “noSuchName.”
◆ Bad values errors – The total number of SNMP PDUs which were
delivered to, or generated by, the SNMP protocol entity and for which
the value of the error-status field is “badValue.”
◆ General errors – The total number of SNMP PDUs which were
delivered to, or generated by, the SNMP protocol entity and for which
the value of the error-status field is “genErr.”