ECS3510-28T_Management Guide-R05

C HAPTER 14 | Basic Administration Protocols
Link Layer Discovery Protocol
– 439 –
the other items and described under “Configuring LLDP Interface
Civic-Address.”
■
ECS ELIN – Emergency Call Service Emergency Location
Identification Number supports traditional PSAP-based Emergency
Call Service in North America.
◆ Country Code – The two-letter ISO 3166 country code in capital ASCII
letters. (Example: DK, DE or US)
◆ What – The type of device to which the location applies as described
for the field entry “Device entry refers to” under “Configuring
LLDP Interface Attributes.”
Port Details – Inventory
7
◆ Hardware Revision – The hardware revision of the end-point device.
◆ Software Revision – The software revision of the end-point device.
◆ Manufacture Name – The manufacturer of the end-point device.
◆ Asset ID – The asset identifier of the end-point device. End-point
devices are typically assigned asset identifiers to facilitate inventory
management and assets tracking.
◆ Firmware Revision – The firmware revision of the end-point device.
◆ Serial Number – The serial number of the end-point device.
◆ Model Name – The model name of the end-point device.
WEB INTERFACE
To display LLDP information for a remote port:
1. Click Administration, LLDP.
2. Select Show Remote Device Information from the Step list.
3. Select Port, Port Details, Trunk, or Trunk Details.
4. When the next page opens, select a port on this switch and the index
for a remote device attached to this port.
5. Click Query.