ECS3510-26P_Management Guide R02

C HAPTER 3 | Using the Web Interface
Navigating the Web Browser Interface
– 89 –
VoIP Voice over IP 269
Configure Global Configures auto-detection of VoIP traffic, sets the Voice VLAN, and
VLAN aging time
270
Configure OUI 271
Add Maps the OUI in the source MAC address of ingress packets to the
VoIP device manufacturer
271
Show Shows the OUI telephony list 271
Configure Interface Configures VoIP traffic settings for ports, including the way in
which a port is added to the Voice VLAN, filtering of non-VoIP
packets, the method of detecting VoIP traffic, and the priority
assigned to the voice traffic
272
Packet Flow Protects against DoS attacks in which the UDP or TCP source port
or destination port is set to zero
366
Security 275
AAA Authentication, Authorization and Accounting 276
System Authentication Configures authentication sequence – local, RADIUS, and TACACS 277
Server 278
Configure Server Configures RADIUS and TACACS server message exchange
settings
278
Configure Group 278
Add Specifies a group of authentication servers and sets the priority
sequence
278
Show Shows the authentication server groups and priority sequence 278
Accounting Enables accounting of requested services for billing or security
purposes
283
Configure Global Specifies the interval at which the local accounting service updates
information to the accounting server
283
Configure Method 283
Add Configures accounting for various service types 283
Show Shows the accounting settings used for various service types 283
Configure Service Sets the accounting method applied to specific interfaces for
802.1X, CLI command privilege levels for the console port, and for
Telnet
283
Show Information 283
Summary Shows the configured accounting methods, and the methods
applied to specific interfaces
283
Statistics Shows basic accounting information recorded for user sessions 283
Authorization Enables authorization of requested services 289
Configure Method 289
Add Configures authorization for various service types 289
Show Shows the authorization settings used for various service types 289
Configure Service Sets the authorization method applied used for the console port,
and for Telnet
289
Table 6: Switch Main Menu (Continued)
Menu Description Page