ECS3510-26P_Management Guide R02

C HAPTER 20 | System Management Commands
SMTP Alerts
– 561 –
Remote Log Server IP Address : 1.2.3.4
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Console#
RELATED COMMANDS
show logging sendmail (564)
SMTP ALERTS
These commands configure SMTP event handling, and forwarding of alert
messages to the specified SMTP servers and email recipients.
logging sendmail This command enables SMTP event handling. Use the no form to disable
this function.
SYNTAX
[no] logging sendmail
DEFAULT SETTING
Enabled
Table 52: show logging trap - display description
Field Description
Remote Log Status Shows if remote logging has been enabled via the logging trap
command.
Remote Log Facility Type The facility type for remote logging of syslog messages as
specified in the logging facility command.
Remote Log Level Type The severity threshold for syslog messages sent to a remote
server as specified in the logging trap command.
Remote Log Server IP
Address
The address of syslog servers as specified in the logging host
command.
Table 53: Event Logging Commands
Command Function Mode
logging sendmail Enables SMTP event handling GC
logging sendmail host SMTP servers to receive alert messages GC
logging sendmail level Severity threshold used to trigger alert messages GC
logging sendmail
destination-email
Email recipients of alert messages GC
logging sendmail source-
email
Email address used for “From” field of alert messages GC
show logging sendmail Displays SMTP event handler settings NE, PE