ECS3510-26P_Management Guide R02

C HAPTER 20 | System Management Commands
File Management
– 540 –
COMMAND USAGE
◆ If you enter the command dir without any parameters, the system
displays all files.
File information is shown below:
EXAMPLE
The following example shows how to display all file information:
Console#dir
File Name Type Startup Modify Time Size(bytes)
-------------------------- -------------- ------- ------------------- ---------
Unit 1:
ECS4110-24T_Op_V0.0.0.1.bix OpCode Y 2012-11-29 01:31:57 11331488
ECS4110-24T_Op_V0.0.0.2.bix OpCode N 2012-11-20 12:46:25 11331488
Factory_Default_Config.cfg Config N 2010-04-02 11:20:49 509
startup1.cfg Config Y 2010-06-30 05:48:16 3484
-----------------------------------------------------------------------------
Free space for compressed user config files: 745472
Used space : 32751616
Total space : 33554432
Console#
whichboot This command displays which files were booted when the system powered
up.
SYNTAX
whichboot
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
Table 47: File Directory Information
Column Heading Description
File Name The name of the file.
File Type File types: Boot-Rom, Operation Code, and Config file.
Startup Shows if this file is used when the system is started.
Create Time The date and time the file was created.
Size The length of the file in bytes.