ECS3510-26P_Management Guide R02

C HAPTER 4 | Basic Management Tasks
Setting the System Clock
– 115 –
WEB INTERFACE
To set your local time zone:
1. Click System, then Time.
2. Select Configure Time Zone from the Action list.
3. Set the offset for your time zone relative to the UTC in hours and
minutes using either a predefined or custom definition.
4. Click Apply.
Figure 15: Setting the Time Zone
CONFIGURING
SUMMER TIME
Use the System > Time (Configure Summer Time) menu to configures
summer time (that is, Daylight Savings Time) for the switch’s internal
clock.
CLI REFERENCES
◆ "clock summer-time" on page 568
USAGE GUIDELINES
◆ In some countries or regions, clocks are adjusted through the summer
months so that afternoons have more daylight and mornings have less.
This is known as Summer Time, or Daylight Savings Time (DST).
Typically, clocks are adjusted forward one hour at the start of spring
and then adjusted backward in autumn.
◆ This configuration page sets the summer-time zone relative to the
currently configured time zone. To specify a time corresponding to your
local time when summer time is in effect, you must indicate the number
of minutes your summer-time zone deviates from your regular time
zone (that is, the offset).