CLI Reference Guide-R05

Chapter 11 | Interface Commands
Interface Configuration
– 368 –
0 Oversize PKTS
0 Fragments
0 Jabbers
0 CRC Align Errors
0 Collisions
5271 Packet Size <= 64 Octets
3589 Packet Size 65 to 127 Octets
222 Packet Size 128 to 255 Octets
313 Packet Size 256 to 511 Octets
190 Packet Size 512 to 1023 Octets
444 Packet Size 1024 to 1518 Octets
===== Port Utilization =====
111 Octets Input in kbits per second
0 Packets Input per second
0.00 % Input Utilization
606 Octets Output in kbits per second
1 Packets Output per second
0.00 % Output Utilization
Console#
Table 73: show interfaces counters - display description
Parameter Description
IF Table Stats
Octets Input The total number of octets received on the interface, including framing
characters.
Octets Output The total number of octets transmitted out of the interface, including
framing characters.
Unicast Input The number of subnetwork-unicast packets delivered to a higher-layer
protocol.
Unicast Output The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that
were discarded or not sent.
Discard Input The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being
deliverable to a higher-layer protocol. One possible reason for
discarding such a packet could be to free up buffer space.
Discard Output The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being
transmitted. One possible reason for discarding such a packet could be
to free up buffer space.
Error Input The number of inbound packets that contained errors preventing them
from being deliverable to a higher-layer protocol.
Extended IF Table Stats
Multicast Input The number of packets, delivered by this sub-layer to a higher (sub-
)layer, which were addressed to a multicast address at this sub-layer.
Multicast Output The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast address at this
sub-layer, including those that were discarded or not sent.
Broadcast Input The number of packets, delivered by this sub-layer to a higher (sub-
)layer, which were addressed to a broadcast address at this sub-layer.
Broadcast Output The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a broadcast address at this
sub-layer, including those that were discarded or not sent.