CLI Reference Guide-R07

Chapter 27 | IP Interface Commands
IPv4 Interface
– 655 –
Command Usage
This command can be used to stop multicast services using UDP packets from
being forwarded to users attached to the downstream port (i.e., the interfaces
specified by this command).
Example
Console(config)#interface ethernet 1/1
Console(config-if)#ip multicast-data-drop
Console(config-if)#
show ip
multicast-data-drop
This command shows if the specified interface is configured to drop multicast data
packets.
Syntax
show ip multicast-data-drop [interface [interface]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
port-channel channel-id (Range: 1-24)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Using this command without specifying an interface displays all interfaces.
Example
Console#show ip multicast-data-drop interface ethernet 1/1
Ethernet 1/1: Enabled
Console#