CLI Reference Guide-R07

Chapter 10 | Access Control Lists
MAC ACLs
– 349 –
{any | host destination | destination address-bitmask}
[cos cos cos-bitmask] [vid vid vid-bitmask]
{permit | deny} untagged-802.3
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
[time-range time-range-name]
no {permit | deny} untagged-802.3
{any | host source | source address-bitmask}
{any | host destination | destination address-bitmask}
tagged-eth2 – Tagged Ethernet II packets.
untagged-eth2 – Untagged Ethernet II packets.
tagged-802.3 – Tagged Ethernet 802.3 packets.
untagged-802.3 – Untagged Ethernet 802.3 packets.
any – Any MAC, IPv4 or IPv6 source or destination address.
host – A specific MAC, IPv4 or IPv6 address.
source – Source MAC, IPv4 or IPv6 address.
destination – Destination MAC, IPv4 or IPv6 address.
address-
bitmask
6
– Bitmask for MAC address (in hexadecimal format).
network-
mask – Network mask for IP subnet. This mask identifies the host
address bits used for routing to specific subnets.
prefix-length - Length of IPv6 prefix. A decimal value indicating how many
contiguous bits (from the left) of the address comprise the prefix; i.e., the
network portion of the address. (Range: 0-128)
cos – Class-of-Service value (Range: 0-7)
cos-bitmask
6
– Class-of-Service bitmask. (Range: 0-7)
vid – VLAN ID. (Range: 1-4094)
vid-bitmask
6
– VLAN bitmask. (Range: 1-4095)
ethertype – A specific Ethernet protocol number. (Range: 0-ffff hex)
ethertype-bitmask
6
– Protocol bitmask. (Range: 0-ffff hex)
time-range-name - Name of the time range. (Range: 1-32 characters)
Default Setting
None
Command Mode
MAC ACL
Command Usage
◆ New rules are added to the end of the list.
6. For all bitmasks, “1” means relevant and “0” means ignore.