CLI Reference Guide-R07

Chapter 13 | Power over Ethernet Commands
– 411 –
show power
mainpower
Use this command to display the current power status for the switch.
Syntax
show power mainpower unit
unit - Unit identifier. (Range: 1)
Command Mode
Privileged Exec
Example
This example shows the maximum available PoE power and maximum allocated
PoE power.
Console#show power mainpower unit 1
Unit 1 PoE Status
PoE Maximum Available Power : 200.0 Watts (using internal power
PoE Maximum Allocation Power : 50.0 Watts
System Operation Status : On
PoE Power Consumption : 15.2 Watts
Software Version : Version 00A1 (Hex), Build 09 (Hex)
Console#
Table 83: show power mainpower - display description
Field Description
PoE Maximum
Available Power
The available power budget for the switch
PoE Maximum
Allocation Power
The power budget for the switch. If devices connected to the switch require
more power than the switch budget, the port power priority settings are used
to control the supplied power.
System Operation
Status
The current operating power status (displays on or off)
PoE Power
Consumption
The current power consumption on the switch in watts
Software Version The version of software running on the PoE controller subsystem in the switch.