CLI Reference Guide-R07

Chapter 8 | Authentication Commands
802.1X Port Authentication
– 252 –
stoc aes128-cbc-hmac-md5
Console#
802.1X Port Authentication
The switch supports IEEE 802.1X (dot1x) port-based access control that prevents
unauthorized access to the network by requiring users to first submit credentials
for authentication. Client authentication is controlled centrally by a RADIUS server
using EAP (Extensible Authentication Protocol).
Table 48: show ssh - display description
Field Description
Connection The session number. (Range: 1-8)
Version The Secure Shell version number.
State The authentication negotiation state.
(Values: Negotiation-Started, Authentication-Started, Session-Started)
Username The user name of the client.
Table 49: 802.1X Port Authentication Commands
Command Function Mode
General Commands
dot1x default Resets all dot1x parameters to their default values GC
dot1x system-auth-control Enables dot1x globally on the switch. GC
Authenticator Commands
dot1x intrusion-action Sets the port response to intrusion when authentication
fails
IC
dot1x max-reauth-req Sets the maximum number of times that the switch sends
an EAP-request/identity frame to the client before
restarting the authentication process
IC
dot1x max-req Sets the maximum number of times that the switch
retransmits an EAP request/identity packet to the client
before it times out the authentication session
IC
dot1x operation-mode Allows single or multiple hosts on an dot1x port IC
dot1x port-control Sets dot1x mode for a port interface IC
dot1x re-authentication Enables re-authentication for all ports IC
dot1x timeout quiet-period Sets the time that a switch port waits after the Max Request
Count has been exceeded before attempting to acquire a
new client
IC
dot1x timeout re-authperiod Sets the time period after which a connected client must
be re-authenticated
IC
dot1x timeout supp-timeout Sets the interval for a supplicant to respond IC