CLI Reference Guide-R07

Chapter 12 | Link Aggregation Commands
Trunk Status Display Commands
– 399 –
Console#show lacp 1 neighbors
Port Channel : 1
------------------------------------------------------------
Member Port : Eth 1/15
Partner Admin System ID : 32768, 00-00-00-00-00-00
Partner Oper System ID : 32768, 70-72-CF-92-9A-71
Partner Admin Port ID : 32768, 15
Partner Oper Port ID : 32768, 15
Partner Admin Key : 1
Partner Oper Key : 1
Partner Admin State : Defaulted, Distributing, Collecting,
Synchronization, Long Timeout, Passive LACP
Partner Oper State : Distributing, Collecting, Synchronization,
Aggregatable, Long Timeout, Actvie LACP
.
.
.
System Priority LACP system priority assigned to this port channel.
Port Priority LACP port priority assigned to this interface within the channel group.
Admin State,
Oper State
Administrative or operational values of the actor’s state parameters:
◆
Expired – The actor’s receive machine is in the expired state;
◆
Defaulted – The actor’s receive machine is using defaulted operational
partner information, administratively configured for the partner.
◆
Distributing – If false, distribution of outgoing frames on this link is
disabled; i.e., distribution is currently disabled and is not expected to be
enabled in the absence of administrative changes or changes in received
protocol information.
◆
Collecting – Collection of incoming frames on this link is enabled; i.e.,
collection is currently enabled and is not expected to be disabled in the
absence of administrative changes or changes in received protocol
information.
◆
Synchronization – The System considers this link to be IN_SYNC; i.e., it has
been allocated to the correct Link Aggregation Group, the group has been
associated with a compatible Aggregator, and the identity of the Link
Aggregation Group is consistent with the System ID and operational Key
information transmitted.
Admin State,
Oper State
(continued)
◆
Aggregation – The system considers this link to be aggregatable; i.e., a
potential candidate for aggregation.
◆
Long timeout – Periodic transmission of LACPDUs uses a slow transmission
rate.
◆
LACP Active or LACP Passive - The configured LACP mode.
Table 77: show lacp neighbors - display description
Field Description
Partner Admin
System ID
LAG partner’s system ID assigned by the user.
Partner Oper
System ID
LAG partner’s system ID assigned by the LACP protocol.
Partner Admin
Port Number
Current administrative value of the port number for the protocol Partner.
Table 76: show lacp internal - display description (Continued)
Field Description