ECS2020 Series Web Management Guide-R04

71
Figure 6-53: Closed Multicast Listener Function Operation
6.9.4 Configuration multicast routing
Click the "Fault/Safety" "MLD" “Router Port,” Select VLAN, click "Add Routing Port" button, to configure the
multicast routing in the port panel:
Figure 6-54: Configuration of Multicast Routing
Multicast routing configuration steps are as follows:
Step 1: In the port panel to select multicast listener routing port;
Step 2: Select VLAN;
Step 3: Click on the "Add Routing Port" button to complete the configuration.
6.9.5 Configuration MLD Group Address
Click the "Fault/Safety" "MLD" “Group Address,” Select a port, select VLAN, and enter the group address: