ECS2020 Series Web Management Guide-R04

105
Notice: Parameters There are some special rules in the configuration. The EVENT should be created first. Please note
the prompts in the configuration. eg: Rising Threshold is greater than Falling Threshold.
7.8.3 Change RMON type
On the RMON configure page, click the type "Event" or "History" and setting parameters. Be careful the parameter
of Community should be exit in SNMP Community name. Configure ok after clicking "Apply".
Figure 7-40: Change ROMN Type is Event
Figure 7-41: Change ROMN Type is History
When the parameters configure is ok, click the Statistics List. We can choose the port to view the information.