ECS2020 Series Web Management Guide-R04

104
To configure SNMP notifications, follow these steps:
Step 1: Enter the IP address of the notification receiver.
Step 2: Specify the community for SNMPv1/v2c users, or the user name for SNMPv3 users.
Step 3: Specify the SNMP version, the notification type, and security level as appropriate.
Step 4: Click the "Apply" button to complete the configuration.
7.8 RMON
7.8.1 View ROMN configure information
Click on the "System Management" "RMON", can view RMON configure information.
Figure 7-38: View RMON Configure Information
7.8.2 Configure ROMN type
Configure ROMN type: Alarm, selected one port to configure and setting parameters and click "Apply" button.
Figure 7-39: Configure ROMN Type