ECS2020 Series Web Management Guide-R04

103
Step 4: Specify the security level for SNMPv3 users and configure the authentication and privacy settings.
Step 5: Click the "Apply" button to complete the configuration.
7.7.11 Configure SNMP Communities
Click "System Management" "SNMP" “Community,” to configure SNMP community settings.
Figure 7-36: SNMP Community Configuration
To configure an SNMP community name, follow these steps:
Step 1: Enter a name of up to 20 characters for the community.
Step 2: Specify the community access mode: Read-Only or Read/write.
Step 3: Specify the MIB View for the community.
Step 4: Click the "Apply" button to complete the configuration.
7.7.12 Configure SNMP Notifications
Click "System Management" "SNMP" “Notification,” to configure SNMP notification settings.
Figure 7-37: SNMP Notification Configuration