ECS2020 Series CLI Reference Guide-R04

96
24 ipv4 client
24.1 Configure commands
ipv4 client
Configure the switch as an IPv4 DHCP client.
ip dhcp
no ip dhcp
disable
Global configuration mode
In the global configure mode, enable ip dhcp so the switch can be allocated an IP
address from a connected DHCP server.
ECS2020-10P(config)# ip
dhcp ECS2020-10P# show
ip dhcp DHCP Status :
enabled
Parameter
Parameter
Description
ip dhcp
Enables the switch as an ip dhcp client.
no ip dhcp
Disables the switch as an ip dhcp clients.
Command
Command
Description
show ip dhcp
Displays the ip dhcp
configuration.
Default
Mode
Example
Usage