ECS2020 Series CLI Reference Guide-R04

86
NULL
Global configuration mode
Sets the MSTP information,if created in the same way as other devices in the region,you
should be ensure that the MSTP version, name, and instance mapping relationship of the
2 devices are the same.
Set the switch MSTP instance as 5, the name as nihao, the revision as 33 and configure
the instance 5 priority as 4096:
ECS2020-10P(config)# spanning-tree mst configuration
ECS2020-10P(config-mst)# instance 5 vlan 5
ECS2020-10P(config-mst)# name nihao
ECS2020-10P(config-mst)# revision 33
ECS2020-10P(config)# spanning-tree mst instance 5 priority 4096
spanning-tree enable
[no] Enable spanning-tree on switch-port
spanning-tree [enable]
no spanning-tree enable
Parameter
Description
spanning-tree mst configure
Enter the MSTP configuration mode
Note that "cr" means no arguments
Instance (1-15) vlan (1-4094)
Configures the mapping relationship
between the MSTP instance and the
VLAN
name
Configuration Bridge name (Max.32
charactor)
revision
MSTP revision level (0-65535)
No instance x
Delete the exit instance
No name
Delete the instance name
No revision
Delete the revision
Spanning-tree mst instance (1-15) priority(0-
61440)
Configure the mstp instance priority,it
must multiples of 4096
Command
Command
Description
show spanning-tree mst configuration
View the current spanning-tree
MSTP status and configuration.
Default
Mode
Usage
Example