ECS2020 Series CLI Reference Guide-R04
84
20
Global configuration mode
Sets the maximum hops count of the switch BPDU in global mode.
Set the BPDU maximum hops count to 30 times:
ECS2020-10P(config)# spanning-tree max-hops 30
spanning-tree pathcost method
By default, the port automatically calculates path consumption based on port rate and specifies the
criteria used when calculating path consumption. There are two calculation criteria: dot1D-1998
and dot1T-2001.
spanning-tree pathcost method [dot1D-1998|dot1T-2001]
Parameter
Description
Parameter
dot1D-1998
Uses the dot1D-1998 port path
consumption calculation criteria.
dot1T-2001
Uses the dot1T-2001 port path
consumption calculation criteria.
dot1T-2001
Global configuration mode
In global mode, sets the calculation method of switch port path consumption value.
Configure the port consumption value is calculated as dot1D-1998
:
ECS2020-10P(config)# spanning-tree pathcost method dot1D-1998
Command
Command
Description
show spanning-tree
View the current spanning tree status and
configuration.
Command
Command
Description
show spanning-tree
View the current spanning tree status
and configuration.
Default
Mode
Usage
Example
Default
Mode
Usage
Example