ECS2020 Series CLI Reference Guide-R04

82
Configuring forwarding delay in global mode.
Configure the spanning-tree forwarding delay:
ECS2020-10P(config)# spanning-tree forward-time 17
spanning-tree hello-time
Configures the spanning tree to send BPDU messages to neighboring
devices at intervals, that is, the transmission frequency of BPDUs.
spanning-tree hello-time [1-10s]
2
Global configuration mode
Set the transmit frequency of the BPDU in the switch in global mode.
Configure the spanning tree BPDU transmission interval:
ECS2020-10P(config)# spanning-tree hello-time 5
Command
Command
Description
show spanning-tree
View the current spanning tree status
and configuration.
Parameter
Parameter
Description
hello-time
This command is used to set the time interval for the
switch to send BPDU to neighboring devices.
Command
Command
Description
show spanning-tree
View the current spanning tree status
and configuration.
Usage
Example
Default
Mode
Usage
Example