ECS2020 Series CLI Reference Guide-R04

79
21.2 Display relevant commands
show loop-detection
Use the following command to view the loop detection configuration.
show loopback-detection
NULL
Privileged mode
In privileged mode, view configuration and status.
Check the loop-detection port configuration and status.
ECS2020-10P# show loopback-detection
Loopback detection configuration
Loopback detection : enabled
CTP tx interval 10
Port resume interval 60
Loopback detection trap: enabled
Interfaces | State | Result |
------------+------------+----------------+
gi0/1
| enabled
| NORMAL
|
gi0/2
| enabled
| NORMAL
|
gi0/3
| enabled
| NORMAL
|
gi0/4
| enabled
| NORMAL
|
gi0/5
| enabled
| NORMAL
|
gi0/6 | enabled | LOOP-SHUTDOWN |
gi0/7 | enabled | NORMAL |
gi0/8 | enabled | NORMAL | gi0/9
| enabled | NORMAL | gi0/10 |
enabled | NORMAL |
agg1 | enabled | LOOP-SHUTDOWN
Parameter
Parameter
Description
show loopback-detection
View the current port loop detection status and
configuration.
Command
Command
Description
show loopback-detection
View the current port loop detection
status and configuration.
Default
Mode
Usage