ECS2020 Series CLI Reference Guide-R04

64
Default
The surveillance-vlan default mode is auto.
Interface configuration mode
If the port set surveillance VLAN mode is auto, the port is automatically a member of the
surveillance VLAN, Note when adding the surveillance VLAN mode to manually join a
port, you need to forward the port to the surveillance VLAN in advance.
Configure port 1 to join surveillance VLAN as auto
ECS2020-10P(config)# interface GigabitEthernet 0/1
ECS2020-10P(config-if-GigabitEthernet0/1)# surveillance-vlan mode auto
surveillance VLAN OUI
In global configuration mode, set the OUI-table and note that the MAC address cannot be
multicast or broadcast addresses. The mask cannot enter zero before F.
surveillance-vlan oui-table A:B:C:D:E:F mask A:B:C:D:E:F
Null
Global configuration mode
In global settings, a oui-table adds the port to a surveillance VLAN when the port's source
MAC address matches the address in the oui list.
Configure voice VLAN OUI
ECS2020-10P(config)# surveillance-vlan oui-table 04:10:12:32:56:89 mask
FF:FF:FF:FF:FF:00 componentType video_encoder
Command
Command
Description
show surveillance-vlan interfaces
GigabitEthernet 0/1
View the configuration of a voice VLAN
Parameter
Mode
Usage
Example
Default
Mode
Usage
Example
Parameter
Description
surveillance-vlan oui-table
Match the filter's source MAC address for the
incoming message