ECS2020 Series CLI Reference Guide-R04

49
Null
Privilege mode
Use the show arp-inspection inferfaces command to show settings or statistics of an
interface.
The example shows how to show settings of interface gig0/1.
ECS2020-10P# show arp-inspection interfaces GigabitEthernet 0/1
Interfaces | Trust State | Rate (pps) | SMAC Check | DMAC Check | IP Check/Allow Zero |
---------- --+-------------+------------+-------------------|-----------------+----------------------------+
gi0/1 | Untrusted | None | disabled | disabled | disabled/disabled
ECS2020-10P# show arp-inspection interfaces GigabitEthernet 0/1 statistics
Port| Forward |Source MAC Failures|Dest MAC Failures|SIP Validation Failures|
DIP Validation Failures|IP-MAC Mismatch Failures
----+-----------+--------------------------+----------------------+--------------------------+---------------
----------------------------+-----------------------------------
gi0/1| 0 | 0 | 0 | 0 |
0 | 0
Parameter
Description
Port-id
Specifies ports to show statistics
Usage
Mode
Default
Parameter