ECS2020 Series CLI Reference Guide-R04
48
Privilege mode
Use the clear arp-inspection interfaces {port-id} statistics command to clear statistics that
are recorded on an interface.
The example shows how to clear statistics on interiface gig0/1t. You can
verify settings by the show arp-inspection interface statistics command.
ECS2020-10P# clear arp-inspection interfaces GigabitEthernet 0/1 statistics
ECS2020-10P# show arp-inspection interfaces GigabitEthernet 0/1 statistics
Port| Forward |Source MAC Failures|Dest MAC Failures|SIP Validation Failures|
DIP Validation Failures|IP-MAC Mismatch Failures
----+-------------+----------------------------+------------------------+------------------------------+
-------------------------------+------------------------
gi0/1| 0 | 0 | 0 | 0
|
0 |
0
14.6
show arp inspection
show arp-inspection interfaces
Null
Privilege mode
Use the show arp-inspection command to show settings of ARP inspection.
The example shows how to show settings of ARP inspection.
ECS2020-10P# show arp-inspection
Dynamic ARP Inspection : enabled
Enable on Vlans : 1-4094
14.7
show arp inspection interface
show arp-inspection interfaces {port-id}
show arp-inspection interfaces {port-id}statistics
Parameter
Parameter
Description
-
-
Default
Usage
Example
Mode
Usage
Example
Mode