Manualshelf

ECS2020 Series CLI Reference Guide-R04

ManualsBrandsEdgecore Networks ManualsEnterprise10/28 GIGABIT WEB-SMART ETHERNET SWITCH
221222223224225226227228229230
230
Management static IPv4 address
This command sets the static IPv4 management address of the switch.
ip address x.x.x.x
192.168.2.10
Global configuration mode
Use this command to configure the system management ip.
ECS2020-10P(config)# ip address 192.168.2.10 mask 255.255.255.0
ECS2020-10P(config)# ip default-gateway 192.168.2.1
Parameter
Parameter
Description
ip address
The int is In the rang of <0-255>
mask
The int is In the rang of <0-255>
default-gateway
The int is In the rang of <0-255>
Command
Command
Description
show ip
Displays the management ip address
information.
Default
Mode
Usage
Example