ECS2020 Series CLI Reference Guide-R04

22
5 Port speed limit
5.1 Configure-relevant commands
rate-limit
In port mode, enables/disables the port input/output rate.
rate-limit {input | output}
no rate-limit {input | output}
Turn off the port speed limit function
Interface configuration mode
Usage After the port speed limit is enabled, the upstream and downstream rates of the ports
are controlled
Example The following is the configuration of the port 0/1 uplink rate limit.
ECS2020-10P(config-if-GigabitEthernet0/1)# rate-limit input 10000
5.2 Display-relevant commands
show rate-limit
Displays the current port rate limit configuration.
show rate-limit
Show rate-limit interfaces {port-id}
Null
parameter
Parameter
Description
rate-limit {input | output}
Enable the port speed limit function, limiting
the input and output speed.
no rate-limit {input | output}
Disable the port speed limit function, limiting
the input and output speed.
Command
Command
Description
show rate-limit
View the current rate configuration
information of the port.
Parameter
Parameter
Description
show rate-limit
Displays the upstream rate limit configuration
information for all the ports
show rate-limit interface {port-id}
Displays the upstream rate limit configuration
information of the current port
Default
Mode
Default