ECS2020 Series CLI Reference Guide-R04

216
Global configuration mode
The command is used to specify a MAC address of a specified VLAN to
be filtered out. Any traffic with that MAC address on the specified VLAN
will not be forwarded through the switch.
ECS2020-10P(config)# mac-address static 0001.7A55.E7D5 vlan 1
drop
configure mac-address aging-time
This command below configures the aging time of dynamic MAC addresses.
mac-address aging-time
630s
Global configuration mode
The time set here will set the aging time for dynamic MAC addresses. If no PDUs with a
MAC address appear during the aging time set then the MAC address will be flushed from
the switch.
ECS2020-10P(config)# mac-address aging-time 500
Command
Command
Description
show mac-address drop
Displays the MAC addresses configured
to drop.
Parameter
Parameter
Description
aging-time
<10-630> the aging time in seconds.
Command
Command
Description
show mac-address aging-time
Displays the MAC-address aging-time
value.
Mode
Usage
Example
Default
Mode
Usage
Example