ECS2020 Series CLI Reference Guide-R04

208
location command
Use this command to configure the system location text string in the switch.
location
Null
Global configuration mode
Use this command to configure the system location
ECS2020-10P(config)# location address 1 Eiffel Flats Road,Kadoma,Zimbabwe
ECS2020-10P(config)# location relation Neville Nkhoma
ECS2020-10P(config)# location telephone [phone]
ipv6
Use this command to statically configure an IPv6 switch management address.
Ipv6 address X:X::X:X
IPv6 gateway X:X::X:X
Parameter
Parameter
Description
address
Sets the host location address
relation
Sets the host location relation
telephone
Sets the host location telephone
Command
Command
Description
show location
Displays the system location
information.
Parameter
Parameter
Description
Ipv6 address
Up to 8 fields of 4 hexadecimal characters.
prefix
<0-128>
Ipv6 gateway
X:X::X:X IPv6 gateway
Default
Mode
Usage
Example