ECS2020 Series CLI Reference Guide-R04

193
4
Global configuration mode
Use the “lldp holdtime-multiplier” command to configure the LLDP PDU hold
multiplier that decides the time-to-live (TTL) value sent in LLDP advertisements.
TTL = (tx-interval * holdtime-multiplier). The configuration can be displayed
using the “show lldp” command.
ECS2020-10P(config)# lldp holdtime-multiplier 3
ECS2020-10P(config)# no lldp holdtime-multiplier
lldp lldpdu
Use this command to configure the action to use for LLDP PDUs when LLDP is disabled.
lldp lldpdu (bridging | filtering | flooding)
flooding
Parameter
Parameter
Description
<2-10>
Specifies the LLDP hold time multiplier.
Command
Command
Description
show lldp
Displays the LLDP information.
Parameter
Description
bridging
When LLDP is globally disabled, LLDP
packets are bridging (bridging lldp pdu to vlan
number ports).
filtering
When LLDP is globally disabled, LLDP
packets are filtered(deleted)
flooding
When LLDP is globally disabled, LLDP
packets are flooded (forwarded to all
interfaces)
Default
Mode
Usage
Example
Default