ECS2020 Series CLI Reference Guide-R04

182
snmp enable traps
Use this command to enable SNMP to actively send trap messages to an NMS. The no form of this
command disables SNMP from sending an NMS traps.
snmp-server enable traps
no snmp-server enable traps
Disabled
Global configuration mode
The command must be used in conjunction with the global configuration command snmp-
server host to send trap messages.
ECS2020-10P(config)# snmp-server enable traps
ECS2020-10P(config)# no snmp-server enable traps
snmp-server community
Use this command to specify the access characters for the SNMP community.
snmp-server community Community name [ro | rw| view]
Parameter
Parameter
Description
snmp-server enable traps
Enables the trap function
no snmp-server enable traps
Disables the trap function
Command
Command
Description
show snmp
View the current SNMP switch status.
Default
Mode
Usage
Example